Getting Started
To enter your truck bed
Step 1
-
Make sure your locking mechanism is in the LOCKED position.
Step 2
-
Ensure that your truck bed is raised to the proper height with the 4 leg attachments in without any obstruction (not blocking your tires)
Step 3
-
Align truck with bed rails and back into your bed
Step 4
-
Back up until the pins are aligned with the holes at the end of the bed rails.
Step 5
-
Once everything's aligned, UNLOCK your locking mechanism and turn the black handle to the left allowing the pins to slide into the openings on the back of your bed rails.
Step 6
-
Once both pins are secured, remove all 4 legs from your bed (you may need to adjust the height first).
Step 7
-
Once your pins are secured and all 4 legs are removed, your bed is secure for you to drive.
To Exit your truck bed
step 1
-
Make sure your truck is parked and turned off.
step 2
-
Place all 4 leg attachments into the 4 openings on all corners of your bed.
step 3
-
Turn all leg-attachment handles clockwise until they're all just touching the ground.
step 4
-
Once they're all at ground-level, you'll be raising your bed a few inches up off of the back of your truck
step 5
-
Turn your two back legs clockwise for 20 rotations and your two front legs clockwise for 30 rotations.
step 6
-
Once your bed is raised the proper amount, always double-check that your locking mechanism is LOCKED so that the pins are out of the holes in the back of the bed rails.
step 7
-
When all four legs are raised and your pins are free, your bed will be standing secured and you're set to drive.